HYDROX CHEMICAL CO INC -- ISOPROPYL RUBBING ALCOHOL 70%  -- 6505-00-299-8095
<pre>=====================  Product Identification  =====================

Product ID:ISOPROPYL RUBBING ALCOHOL 70%
MSDS Date:09/30/1995
FSC:6505
NIIN:00-299-8095
=== Responsible Party ===
Company Name:HYDROX CHEMICAL CO INC
Address:825-B TOLLGATE RD
City:ELGIN
State:IL
ZIP:60123
Country:US
Info Phone Num:708-468-9400
Emergency Phone Num:708-468-9400
CAGE:1DZ38
=== Contractor Identification ===
Company Name:HYDROX CHEMICAL CO INC
Address:825-B TOLLGATE RD
Box:City:ELGIN
State:IL
ZIP:60123
Country:US
Phone:800-255-3924/708-468-9400
CAGE:1DZ38

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPYL ALCOHOL (SARA III)  **SEE SUPP DATA**
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 70%
Other REC Limits:400 PPM
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:GENERALLY USED AS A RUBDOWN. VAPOR
    IRRITATES EYES. HIGH CONCENTRATION OF VAPOR CAN IRRITATE
    RESPIRATORY TRACT, ARE ANESTHETIC AND MAY CAUSE CNS DEPRESSION.
Explanation of Carcinogenicity:NOT A CARCINOGEN
Effects of Overexposure:GIDDINESS, HEADACHE, DIZZINESS AND NAUSEA.
Medical Cond Aggravated by Exposure:EPRE-EXISTING EYE & RESPIRATORY
    DISORDERS, MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:MOVE TO FRESH AIR.  IF SWALLOWED, INDUCE VOMITING AND CALL
    PHYSICIAN. FLUSH SKIN AND EYE CONTACT WITH WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:=25.C, 77.F
Lower Limits:2
Upper Limits:12
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM WATER FOG.
Fire Fighting Procedures:DILUTION OF BURNING LIQUID WITH WATER WILL
    EFFECT EXTINGUISHMENT.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. SMALL SPILLS
    SHOULD BE FLUSHED WITH LARGE AMOUNTS OF WATER. LARGE SPILLS SHOULD
    BE COLLECTED FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
    HEAT, SPARKS AND OPEN FLAMES. HANDLE CAREFULLY.
Other Precautions:DO NOT TAKE INTERNALLY. FLAMMABLE LIQUID. AVOID
    SPILLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR SUPPLIED MASKS IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST: PREFFERED. MECHANICAL: ACCEPTABLE.
Protective Gloves:RUBBER OR VINYL GLOVES.
Eye Protection:GOGGLES.
Other Protective Equipment:EYE BATH AND SAFETY SHOWERS.
Work Hygienic Practices:HANDLE CAREFULLY, AVOID SPILLING.
Supplemental Safety and Health
NONE **KEVIN DUBINSKI WROTE NOV96 EXPLAINING THAT THIS MSDS IS
    INCORRECT FOR THE NSN. (% SHOULD BE >99%) SINCE THE MSDS WAS
    APPARENTLY ENTERED AS RECEIVED & IN GOOD FAITH, NO CHANGE IS MADE
    EXCEPT THI S NOTE.**

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=87.2C, 189.F
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.88
Evaporation Rate &amp; Reference:2.3 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID, CHARACTERISTIC ODOR.
Percent Volatiles by Volume:100%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ANHYDRIDE, ISOCYANATE, MONOMER & ORGANO-METALLIC
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
    CONTAMINATION

====================  Disposal Considerations  ====================

Waste Disposal Methods:ATOMIZE INTO A INCINERATOR WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL, STATE AND LOCAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.