AMERITONE PAINT CORP -- INDUSTRIAL FINISHES HIGH-GLOSS ENAMEL, 875  -- 8010-00N048788
<pre>=====================  Product Identification  =====================

Product ID:INDUSTRIAL FINISHES HIGH-GLOSS ENAMEL, 875
MSDS Date:01/01/1992
FSC:8010
NIIN:00N048788
=== Responsible Party ===
Company Name:AMERITONE PAINT CORP
Address:18414 S SANTA FE AVE
Box:190
City:LONG BEACH
State:CA
ZIP:90801
Country:US
Info Phone Num:213-639-6791
Emergency Phone Num:303-623-5716;800-424-9300(CHEMTREC)
CAGE:FO133
=== Contractor Identification ===
Company Name:AMERITONE COATING CORP
Box:City:LONG BEACH
State:CA
ZIP:90801
Country:US
Phone:310-639-6791
CAGE:97903
Company Name:AMERITONE PAINT CORP/COMPTON, CA 90221
Box:190
CAGE:FO133

=============  Composition/Information on Ingredients  =============

Ingred Name:ING 7: COATING & DECOMP PROD DURING WELDING & FLAME CUTTING
    ON SURF COATED W/THIS PRODUCT.
RTECS #:9999999ZZ

Ingred Name:ALKYD RESIN
Fraction by Wt: 40%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINERAL SPIRITS   VP: 2 @ 68F   LEL: 1%
CAS:64742-88-7
Fraction by Wt: 50%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: <5%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Ingred Name:VOLATILE ORGANIC COMPOUNDS: 518 G/L
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:RESP PROT: WEAR NIOSH/MSHA APPRVD AIR SUPPLY RESP/HOODS.
    USE NIOSH/MSHA APPRVD RESP WHEN FLAME CUTTING, WELDING, (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5:BRAZING & SANDING MATL COATED W/THIS PROD. FOLLOW
    RESP MFR'S DIRECTIONS FOR RESP USE.
RTECS #:9999999ZZ

Ingred Name:VENT: CURRENT APPLIC SFTY & HLTH STDS IN MIXING, APPLICATN
    & CURING AREAS & TO REMOVE SANDING DUSTS OF DRIED (ING 8)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRITATION OF THE
    RESPIRATORY TRACT; MAY AFFECT THE BRAIN/NERVOUS SYSTEM CAUSING
    DIZZINESS, HEADACHE, NAUSEA. EYES: IRRITATION. SKIN: IRRITATION.
    INGEST: CAN CAUSE STOMACH &/OR INTESTINA L IRRITATION, NAUSEA,
    VOMITING & DIARRHEA. ASPIRATION OF VOMITUS CAN CAUSE CHEMICAL
    PNEUMONITIS, WHICH (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CAN BE FATAL. CHRONIC: PROLONGED &
    REPEATED BREATHING OF SPRAY MIST &/OR SANDING DUST OVER A PERIOD OF
    YEARS MAY CAUSE DUST DISEASE OF THE LUNGS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
    SAFE HANDLING AND USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH LARGE
    AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ASSISTANCE.
    SKIN: REMOVE WITH SOAP AND WATER. REMOVE SOILED CLOTHING.
    INGESTION: DRINK 1 O R 2 GLASSES OF WATER. DO NOT INDUCE VOMITING.
    CONSULT PHYSICIAN IMMEDIATELY. TREAT SYMPTOMATICALLY. NEVER GIVE
    ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

=====================  Fire Fighting Measures  =====================

Lower Limits:SEE INGS
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM OR OTHER
    NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER SPRAY MAY BE INEFTIVE. IF WATER IS USED, FOG NOZZ PREF. IF
    EXPOS TO FIRE/EXTREME HEAT, WATER (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
    HEAT & FLAME. DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPOS TO EXTREME
    HEAT MAY EXPLODE. NEVER USE WELDING/CUTTING (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEANUP,
    REFER TO HAZARD INFORMATION IN MSDS. CONTAIN SPILLED MATERIAL AND
    REMOVE WITH INERT ABSORBENT. STORE IN CLOSED CONTAINERS UNTIL
    PROPERLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 110F. KEEP FROM FREEZING.
    KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
    CONTAINERS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT BREATHE VAPORS, SPRAY MIST OR SANDING DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREA
    W/UNRESTRICTED VENT & DURING SANDING/GRINDING OPERATIONS, USE
    NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE
    PARTICLES OF OVERSPRAY & SANDING DUST.  WHEN USED IN RESTRICTED
    AREAS, (ING 5)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION/LOC EXHST VENT
    IN VOL & PATTERN TO KEEP AIR CONTAMINANT CONC BELOW (ING 7)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
    WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: SHOULD BE USED TO COOL CLSD CNTNRS TO PVNT PRESS
    BUILD-UP/AUTOIGNIT. EXPLO HAZ: TORCH ON/NEAR CNTNR (EVEN EMPTY) AS
    PROD/ITS RESIDUE MAY IGNITE. DURING EMER CNDTNS, OVEREXP TO DECOMP 
    PRODS MAY CAUSE HLTH HAZ. SYMP MAY NOT BE PRESENT/IMMED APPARENT.
    OBTAIN MED ATTN.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:600F,316C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.907
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:65.7

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH MATERIALS THAT ARE UNSTABLE WITH WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZARDOUS FUMES WHEN HEATED
    TO DECOMP. FUMES MAY CONTAIN CO, CO*2 AND OXIDES OF METALS LISTED
    IN INGREDIENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
    INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.